4 Configuration D-Link Smart Managed Switch User Manual
2
2
7
7
Figure 4.33 – L2 Features > VLAN > Port-Based VLAN - Enabled
Enter the VLAN Name and select the Member port to be created.
Click Apply to make the configurations take effect.
Click Cancel to discard any changed made and return to the previous page.
L2 Features > VLAN > Management VLAN
The 802.1Q Management VLAN setting allows user to transfer management authority of the switch from the
default VLAN to another VLAN. This allows for more flexible network management. By default, the
Management VLAN is disabled. You can select any existing VLAN as the management VLAN when this
function is enabled. There can only be one management VLAN at a time.
Figure 4.34 – L2 Features > VLAN > Management VLAN
The fields that can be configured for Management VLAN are described below:
Item Description
Management VLAN Select to enable or disable the Management VLAN function.
VID Select the VID to act as the managing VLAN.
Table 4.17
Click Apply to make the configurations take effect.
NOTE: When 802.1Q Management
enabled, the 802.1Q VLAN should be enabled
first.
L2 Features > VLAN > Asymmetric VLAN
The Asymmetric VLAN allows for a more efficient use of shared resources, such as server or gateway
devices.
Figure 4.35 – L2 Features > VLAN > Asymmetric VLAN
The fields that can be configured for Asymmetric VLAN are described below:
Item Description
To Next Page
Loading...
