Ethernet Technology D-Link Smart Managed Switch User Manual
4
4
1
1
PoE Passthrough
The DGS-1100-05PDV2 is a PoE passthrough switch that is powered through a Powered Device (PD) port
(Port 5) and can also provide PoE power (Port 1~2) to connected devices. This means that power cords will
become a thing of the past with the flexibility to place the switch on the ceiling, wall, or other places where
power outlets may not be available.
The behavior of DGS-1100-05PDV2 PoE Passthrough as following
PD Port PSE Port
Note
Port 5 Connected Device
Type
Port 1 PD Class Type
Support
Port 2 PD Class Type
Support
IEEE802.3af PoE Switch
or Injector
Class1 or 2 NA
Only Port 1 connected
to link partner
IEEE802.3af PoE Switch
or Injector
NA Class1 or 2
Only Port 2 connected
to link partner
IEEE802.3at PoE Switch
or Injector
Class0 or 3 NA
Only Port 1 connected
to link partner
IEEE802.3at PoE Switch
or Injector
NA Class0 or 3
Only Port 2 connected
to link partner
IEEE802.3at PoE Switch
or Injector
Class1 or 2 Class1 or 2
Port 1 and Port 2
connected to link partner
To Next Page
Loading...
