4 Configuration D-Link Smart Managed Switch User Manual
28
Asymmetric VLAN
State
Specify to enable or disable the Asymmetric VLAN of the Switch.
The default value is disabled.
Table 4.18
Click Apply to make the configurations take effect.
L2 Features > VLAN > Surveillance VLAN
Surveillance VLAN is a feature that allows you to place the video traffic from D-Link IP cameras to an
assigned VLAN to enhance the IP surveillance service. With a higher priority and individual VLAN, the quality
and the security of surveillance traffic are guaranteed. The Surveillance VLAN function will check the
source MAC address and VLAN ID on the incoming packets. If it matches the specified MAC address /
VLAN ID, the packets will pass through with desired priority
The Surveillance VLAN settings that can be configured are as follows:
Figure 4.36 – L2 Features > VLAN > Surveillance VLAN
The fields that can be configured for Surveillance VLAN are described below:
Item Description
Surveillance VLAN Global Settings
Surveillance VLAN Specify to enable or disable the Surveillance VLAN function.
VLAN ID Specify the VLAN ID to act as the Surveillance VLAN.
Priority
Specify the priority level. The levels of priority are High,
Medium and Low. The default priority is High.
To Next Page
Loading...
