D-Link DGS-1210/ME User Manual

4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.171 - Monitoring > Ethernet OAM > Browse Ethernet OAM Event Log
Port: Select the port to be viewed.
Port List: Enter a list of ports. Tick the All Ports check box to select all ports.
Click Find to locate a specific entry based on the information entered.
Click Clear to clear all the information entered in the fields.
Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics
The Browse Ethernet OAM Statistics page displays the ports Ethernet OAM statistics information.
Figure 4.172 - Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics
Port List: Enter a list of ports. Tick the All Ports check box to select all ports.
Click Clear to clear all the information entered in the fields.
Monitoring > IGMP Snooping > IGMP Snooping Group
The IGMP Snooping Group page is used to display the current IGMP snooping static group information on
the Switch.
Figure 4.173 - Monitoring > IGMP Snooping > IGMP Snooping Group
100

D-Link DGS-1210/ME Specifications

General

Model	DGS-1210/ME
Category	Switch
MAC Address Table Size	8K
Power Supply	Internal
Quality of Service (QoS)	Yes
Humidity	5% to 95% non-condensing
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C