4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.201 – LLDP > LLDP Remote Port Normal Table
To view the detail settings for a remote port, click View Detailed and the following page displays.
Figure 4.202 – LLDP > LLDP Remote Port Detailed Table
LLDP > LLDP-MED Settings
By selecting a range of ports (From Port and To Port), the power PSE TLV type can be enabled for all
selected ports to indicate the power source equipment (PSE) switch to transmit high power (15.4 to 30 Watts)
to the pre-standard of 802.3at power devices via LLDP MDI TLV. Through this feature, the PSE can provide
precise output power to the pre-standard of 802.3at power devices and achieve optimal power management.
118
To Next Page
Loading...
