D-Link DGS-1250 Series - Console Cable

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
36
Console Cable
A console cable is used to connect to the RJ45 console port of the Switch to access the command line interface. The
following diagram and table show the standard RJ45 to RS-232cable and pin assignments.
Figure B-2 Console to RJ45 Cable
RJ45 to RS-232 Cable Pin Assignment Table:
Contact Console (DB9/RS232) RJ45
1
Not Used
Not Used
2
RXD
Not Used
3
TXD
TXD
4
Not Used
GND
5
GND (shared)
GND
6
Not Used
RXD
7
Not Used
Not Used
8
Not Used
Not Used