DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
47
Feature Detailed Description
• For 802.3af/at capable devices it will provide the power for the
following classifications below:
Class Usage Max Power used by PD
0 Default 0.44 Watt to 12.95 Watt
1 Optional 0.44 Watt to 3.84 Watt
2 Optional 3.84 Watt to 6.49 Watt
3 Optional 6.49 Watt to 12.95 Watt
4 Optional (802.3at Only) 12.95 Watt to 25.5 Watt
• Follow the PSE pin out standard. For an alternative solution,
send the power over pins 1, 2, 3, 6 and 8 wires. Use Category
3, 6A UTP cable for 802.3af or Category 5e, 6A UTP cable for
802.3at
• The PoE switch works with all D-Link 802.3af and 802.3at
capable devices and with all non-802.3af and non-802.3at
capable D-Link Access Points, IP Cameras and IP Phones
• The total PoE power budget of the:
o DGS-1510-28P is 193 Watts
o DGS-1510-28XMP is 370 Watts
o DGS-1510-52XMP is 370 Watts or 740 Watts with DPS-
700
To Next Page
Loading...
