DGS-3224TG Gigabit Ethernet Switch User’s Guide
Figure 7-26. Utilization of Port window
The information is described as follows:
• Time Interval – Select the desired setting between 1s and 60s, where “s” stands for seconds.
The default value is one second.
• Record Number – Select number of times the switch will be polled between 20 and 200. The
default value is 20.
• Show/Hide – Check whether or not to display Utilization.
• Clear – Clicking this button clears all statistics counters on this window.
Packets
The Web Manager allows various packet statistics to be viewed as either a line graph or a table. The six
windows offered are as follows:
102
To Next Page
Loading...
