DGS-3224TG Gigabit Ethernet Switch User’s Guide
Figure 6-47. Use Configuration File on TFTP Server screen
Enter the IP address of the TFTP server and specify the location of the switch configuration file on the
TFTP server.
Highlight APPLY and press Enter to record the IP address of the TFTP server. Use Save Changes from
the main menu to enter the address into NV-RAM
Highlight START and press Enter to initiate the file transfer.
Save Settings to TFTP Server
To upload a settings file to the TFTP server, highlight Save Settings to TFTP Server and press Enter.
72
To Next Page
Loading...
