D-Link DGS-3224TG - Traffic Class Configuration; Configure RS232 and SLIP

DGS-3224TG Gigabit Ethernet Switch User’s Guide
This screen allows you to set a default priority for packets that have not already been assigned a
priority value. After filling out the two fields offered, press APPLY to let your changes take effect.
Traffic Class Configuration
Select Configure Traffic of Class and press Enter to access the following screen:
Figure 6-33. Traffic Class Configuration screen
This screen allows you to configure traffic class priority by specifying the class value, from 0 to 3, of the
switch’s eight levels of priority. Press APPLY to let your changes take effect.
Configure RS232 and SLIP
Select Configure RS232 and SLIP and press Enter to access the following screen:
60