D-Link DHP-1320 - Hardware Overview

5D-Link DHP-1320 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 AP-Router Switch Two-way switch used to Select AP or Router Mode.
2 LAN Ports (1-3) Connect 10/100 Ethernet devices such as computers, switches, and hubs.
3 Internet Port
The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL
modem.
4 Reset Button Pressing the Reset button restores the router to its original factory default settings.
5 USB USB 1.1/2.0 port for SharePortTM Network and WCN support.
6 Power Button Use this switch to power on/power o the device.
7 Power Receptor Receptor for the supplied power cord.
2 3
4
5
6
1 7