Need help?Do you have a question about the D-Link DHP-1320 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Input voltage | 100 - 240 V |
| Frequency range | 2.4 - 2.4835 GHz |
| Input frequency | 50/60 Hz |
| Dimensions (WxDxH) | 203.2 x 139.7 x 38.09 mm |
| USB ports quantity | 1 |
| Minimum system requirements | Windows 7, Vista, XP SP3 |
| DHCP client | - |
| Antennas quantity | 2 |
| Antenna gain level (max) | 2 dBi |
| Ethernet LAN (RJ-45) ports | 13 |
| Security algorithms | 128-bit AES, 128-bit WEP, 64-bit WEP, WPA, WPA2-PSK, WPS |
| Minimum RAM | 64 MB |
| Minimum processor | 200 MHz |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Product color | White |
Weight and Dimensions| Weight | 484.43 g |
|---|
Describes the physical components and connections of the DHP-1320 router.
Provides essential preliminary steps and considerations before starting the router installation.
Guides through the physical setup of the router for its primary function.
Steps to connect the router to your internet service modem.
Instructions for connecting the router to an existing router.
Guides physical setup for using the router as an access point.
Access the router's configuration through a web browser.
Covers configuring the router's internet connection settings.
Configure wireless network settings like SSID, security, and channel.
Configure local network and DHCP server settings.
Configure PowerLine AV settings when the router is in router mode.
Access advanced network configuration options.
Manual setup for static IP internet connections.
Manual setup for dynamic IP (DHCP) internet connections.
Manual setup for PPPoE internet connections.
Manual setup for PPTP internet connections.
Manual setup for L2TP internet connections.
Detailed manual settings for 802.11n/b/g wireless.
Configure the router as a virtual server for remote access.
Configure port forwarding rules for specific applications.
Configure firewall settings like SPI and DMZ.
Access the AP's configuration through a web browser.
Configure wireless network settings for AP mode.
Steps to configure WEP encryption for wireless security.
Configure WPA/WPA2-Personal security with a pre-shared key.
Steps to take if the router password is forgotten.
To Next Page
