D-Link DHP-1320 - Tools; Admin

81D-Link DHP-1320 User Manual
Section 3 - Conguration
IPv6 over IPv4 Tunnel - Stateful
Enable automatic
IPv6 address
assignment:
Autoconguration
Type:
IPv6 Address
Range Start:
IPv6 Address
Range End:
IPv6 Address
Lifetime:
Check to enable the automatic IPv6 address assignment
feature.
Select Stateful (DHCPv6). Refer to the next page for
Stateless.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the IPv6 Address Lifetime (in minutes).
IPv6