D-Link DHP-1320 - Network Settings - DHCP

112D-Link DHP-1320 User Manual
Section 3 - Conguration
Network Settings - DHCP
This section will allow you to change the local network settings of the access point and to congure the DHCP settings.
LAN Connection
Type:
Device Name:
Save Settings:
Use the drop-down menu to select Dynamic IP (DHCP)
to automatically obtain an IP address on the LAN/private
network.
Enter the Device Name of the AP. Changing the Device
Name is recommended if there is more than one D-Link
device within the subnet.
Click Save Settings to save and activate the
new changes.