D-Link DHP-P610AV

19D-Link DHP-W611AV User Manual
Section 3 - Conguration
Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses. When enabled, you can choose
to block the devices listed, or only allow the devices listed.
MAC Address Filter
MAC Filtering
Rules:
Description:
MAC Address:
Set MAC Filtering to ALLOW, DENY, or OFF. ALLOW means
only the devices listed can access the network. DENY means
the devices listed cannot access the network. OFF means this
function is currently disabled.
You enter a custom description for convenience; for example,
“My PC” or “My friend’s smartphone”.
Enter the MAC address you would like to lter.
Note: If you are ltering to ALLOW only the listed devices,
make sure to add your own computer to the list or you will
be denied access to the network and the conguration utility.
If you DENY the listed addresses be sure not to include your
own computer. You can delete the rule by clicking on the
Clear button next to the rule.
Click Save Settings for the changes to take eect.
Advanced