20D-Link DHP-W611AV User Manual
Section 3 - Conguration
Advanced Wireless
Transmit Power:
WLAN Partition:
HT20/40
Coexistence:
Sets the power of the antennas.
Select this checkbox to enable WLAN partition. If this feature
is disabled, then there is no barrier between communication
among wireless stations connecting to the DHP-W610AV. If
this is enabled, wireless clients are not allowed to exchange
data with each other through the DHP-W610AV.
Enabling this function allows compatibility with both
802.11ac/n devices as well as 802.11a/g by using both bands.
Disabling this may provide higher speeds by automatically
selecting one band but may only allow 802.11ac/n devices
to function.
Click Save Settings for the changes to take eect.
This section allows you to change several advanced settings for both 2.4G and 5G on your DHP-W610AV.
To Next Page
Loading...
