D-Link DHP-P610AV

25D-Link DHP-W611AV User Manual
Section 3 - Conguration
Time
The Time page allows you to congure, update, and maintain the correct time on the internal system clock. From this section you can set the time
zone that you are in. Daylight Saving can also be congured to automatically adjust the time when needed.
Time Zone:
Daylight Saving:
Enable NTP
Server:
NTP Server Used:
Date and Time:
Select your Time Zone from the drop-down menu.
To enable Daylight Saving time adjustment, click the Enable
Daylight Saving check box. Next, use the drop-down menu
to select a Daylight Saving Oset and then enter a start date
and an end date for daylight saving dates.
NTP (Network Time Protocol) allows the device to automatically
set the system clock based on an Internet NTP server. Check
this box to use a NTP server. This will only connect to a server
on the Internet, not a local server.
Enter the NTP server or select one from the drop-down menu.
To manually input the time, select the values in the drop-
down menus for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings. You can also click the
Copy Your Computer’s Time Settings button at the bottom
of the screen.
Click Save Settings for the changes to take eect.