D-Link DHP-P610AV

42D-Link DHP-W611AV User Manual
Section 3 - Conguration
Highlight the wireless network (SSID) you would like to connect to and click
the Connect button. The Wi-Fi Conguration Card will list your device’s specic
network.
If you get a good signal but cannot access the Internet, check your TCP/IP settings
for your wireless adapter.
The following window appears while your computer tries to connect to the router.
Enter the same security key or passphrase that is on your DHP-W610AV and click
Connect.
It may take 20-30 seconds to connect to the wireless network. If the connection
fails, please verify that the security settings are correct. The key or passphrase
must be exactly the same as on the wireless router.
Additionally, you may connect using Wi-Fi Protected Setup (WPS) and Push Button
Conguration (PBC). When the window to the right is displayed, press the Simple
Connect Button on the DHP-W610AV.