D-Link DIR-412 - Manual Configuration (WAN Mode)

23D-Link DIR-412 User Manual
Section 3 - Conguration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your
Internet type and enter the correct conguration parameters.
Manual Conguration (WAN Mode)
Select your Internet connection type using the
“My Internet Connection is:” drop-down menu.
To enable the Router to connect to the Internet
via the 3G Internet connection in the event that
the WAN connection fails, check the Enable WAN
Failover box. Congure the parameters for your
WAN connection in the section below the Internet
Connection Type section as described in the
following pages.
If enabling the WAN Failover feature, congure
the parameters for your 3G Internet Connection.
Internet Connection Type:
3G Internet Connection:
Click the Save Settings button when you have nished
conguring the WAN connection.