D-Link DIR-412 - Top View

5D-Link DIR-412 User Manual
Section 1 - Product Overview
Hardware Overview
Top View
1 Power LED
Lights orange during bootup. Lights green when router has booted up. A solid green light indicates a proper
connection to the power supply. If the LED blinks orange the system has failed.
2 Internet LED
A solid green light indicates a successful 3G connection. A solid orange light indicates a 3G error, a WAN failure,
or a system failure. A blinking green light indicates that the WAN connection is enabled when the Router is
operating in WAN mode.
3 WLAN LED A solid green light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.
4 Ethernet LED A solid green light indicates that a link has been established. This LED blinks during data transmission.
5 WPS Button
Press the WPS button for 1 second to initiate the WPS process. The button will ash blue while a WPS connection
is being established. The button will light blue for 120 seconds (2 minutes) if a successful WPS connection has
been made.
6 3GUSBConnection Connect your 3G USB adapter to this port if you want to use a 3G Internet connection.
1 2 3 4
5
6