D-Link DIR-400 User Manual (English)

Other manuals for D-Link DIR-400

Do you have a question about the D-Link DIR-400 and is the answer not in the manual?

D-Link DIR-400 Specifications

Standards	IEEE 802.3, IEEE 802.3u
Frequency Band	2.4 GHz
Wireless Speed	54 Mbps
Wireless Standards	IEEE 802.11g
Security	WEP, WPA, WPA2
Ports	1 x 10/100 Mbps WAN, 4 x 10/100 Mbps LAN
Wireless Data Rates	54, 48, 36, 24, 18, 12, 9, 6 Mbps

Summary

Details the security functions provided by the router's built-in firewall.

Provides essential preparatory steps before starting the router installation.

Explains how to access and use the router's web interface for settings.

Addresses issues related to accessing the router's web interface.

Related product manuals

D-Link DIR-400 User Manual

Table of Contents

Other manuals for D-Link DIR-400

D-Link DIR-400 Specifications

Summary

Features

Advanced Firewall Features

Hardware Overview

Installation

Before you Begin

Wireless Installation Considerations

Connecting to a Cable/DSL/Satellite Modem

Connecting to Another Router

Configuration

Web-based Configuration Utility

Setup Wizard

Internet Setup (Dynamic Cable)

Internet Setup PPPoE (DSL)

Internet Setup PPTP

Internet Setup L2TP

Internet Setup Big Pond

Internet Setup Static (assigned by ISP)

Wireless Setup (Automatic)

Wireless Setup (Manual)

Enabling WEP Wireless Security

Enabling WPA, WPA2, WPA/WPA2 Wireless Security

Enabling WPA, WPA2, WPA/WPA2 Wireless Security for a RADIUS Server

Adding a Wireless Device through WPS

Adding a Wireless Device through WPS (Wi-Fi Protected Setup)

Adding a Wireless Device through WPS (PIN)

Adding a Wireless Device through WPS (PBC)

LAN Setup

DHCP Reservation

Parental Control

Port Forwarding

Application Rules

Access Control

Firewall & DMZ - DMZ Host

Firewall & DMZ - Firewall Rules

Advanced Wireless

Advanced Network

Routing

Device Administration

Firmware Update

Wireless Security

What is WEP?

Configuring WEP

What is WPA?

Configuring WPA-PSK and WPA2-PSK

Configuring WPA/WPA2-PSK

Configuring WPA, WPA2, & WPA/WPA2 (RADIUS)

Connecting to a Wireless Network Using Windows® XP

Configure WEP

Configuring WPA-PSK

Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)

Initial Router Configuration for Wi-Fi Protection

Setting Up a Configured Router

Configuring the IP Address in Vista

Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)

Connecting to an Unsecured Wireless Network

Troubleshooting

Why can’t I access the web-based configuration utility?

What can I do if I forgot my password?

Why can’t I connect to certain sites or send and receive emails when connecting through my router?

Assigning a static IP address

Related product manuals