39D-Link DIR-400 User Manual
Section 3 - Conguration
Adding a Wireless Device through WPS (PIN)
Here, you can add a device by using a PIN number,
or by using Push Button Configuration (PBC).
Connecting using a PIN number is more secure,
while PBC is much easier to use.
If you chose to add your device by PIN number, click
the circle next to PIN and enter the PIN number of
your device. Click Connect.
Press the PBC Connect button on your device within
2 minutes to automatically congure that device’s
wireless connection.
After 2 minutes, you will be taken back to the Wireless
Setup screen. If no devices were connected during
that time, a screen will appear allowing you to retry
device connection.
To Next Page
Loading...
