D-Link DIR-400 - Save and Restore

55D-Link DIR-400 User Manual
Section 3 - Conguration
Save and Restore
Use this option to save the current router
conguration settings to a le on the hard disk of
the computer you are using. First, click the Save
button. You will then see a le dialog, where you can
select a location and le name for the settings.
Use this option to load previously saved router
configuration settings. First, use the Browse
control to nd a previously save le of conguration
settings. Then, click the Upload Settings button
to transfer those settings to the router.
This option will restore all conguration settings
back to the default settings that the router came
with. Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, use the Save button above.
Click the Reboot button on the left side of the
window to restart the router.
Save Settings
to Local Hard
Drive:
Load Settings
from Local
Hard Drive:
Restore to
Factory Default
Settings:
Reboot:
This window allows you to save your conguration le to a hard drive, load conguration settings from a hard drive,
and restore the router’s factory default settings.