D-Link DIR-400 - Wireless Setup (Automatic)

30D-Link DIR-400 User Manual
Section 3 - Conguration
Wireless Setup (Automatic)
Wireless settings for the router may be congured manually or by
using a wizard. To use the wizard, click the Wireless Connection
Setup Wizard button and then follow the steps that are described
below. To congure the wireless settings manually, click the Manual
Wireless Connection Setup button. After setting up your wireless
network, you can use the Add Wireless Device With WPS(Wi-Fi
Protected Setup) Wizard to add wireless devices to your network.
The parameters for this window are described later in this section.
The Wireless Security section that directly follows this Conguration
section provides additional explanation for how to congure the WEP,
WPA, WPA2, and WPA/WPA2 wireless security mode options.
Enter a Wireless Network Name (SSID) in the text box to identify
your wireless network. Check Automatically assign a network key
if you want the DIR-400 to automatically generate a secure network
key for you to use, or check Manually assign a network key to
create your own network key. WEP encryption(more compatible)
is used by default; if you want to use WPA encryption(newer, more
secure), check the Use WPA encryption instead of WEP checkbox.
Click Next.