D-Link DIR-400 - Access Control

48D-Link DIR-400 User Manual
Section 3 - Conguration
Access Control
Here, you have three options: Select Turn MAC
Filtering OFF, Turn MAC Filtering ON and ALLOW
computers listed to access the network, or Turn
MAC Filtering ON and DENY computers listed to
access the network.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
You can use the dropdown box (Computer Name)
to automatically enter the MAC address of a
computer currently connected to the router. To do
so, select a computer from the dropdown box, then
click the << button.
This selects which schedule will be used to
determine when the MAC lter will be enabled. The
schedule may be set to Always, which will allow the
particular service to always be enabled.
Clicking on Add New will allow you to make a new
schedule. You can view current schedule settings
in the Maintenance > Schedules section.
Congure MAC
Filter:
MAC Address:
DHCP Client
List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers from accessing the
Network based on their MAC addresses. You can either manually add a MAC address or select the MAC address from
the list of clients that are currently connected to the router.