D-Link DIR-412 - Dynamic IP Address (DHCP)

25D-Link DIR-412 User Manual
Section 3 - Conguration
The Host Name is optional but may be required
by some ISPs. The default host name is the device
name of the Router and may be changed.
Enter the Primary and Secondary DNS server IP
addresses assigned by your ISP.
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specic ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC’s MAC Address
button to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.
Host Name:
DNS Addresses:
MTU:
MAC Address:
Choose Dynamic IP (DHCP) from the My Internet Connection is drop-down menu if all WAN IP information is obtained from
your ISP.
Manual Conguration (WAN Mode)
Dynamic IP Address (DHCP)