D-Link DIR-412 - Time Settings; Time Settings Configuration

55D-Link DIR-412 User Manual
Section 3 - Conguration
Time Settings
Select the Time Zone from the drop-down menu.
Check the box to enable Daylight Saving time.
Click this button to set the device’s time the same to local
PC.
Check the box to enable the device to automatically
synchronize with a D-Link NTP Server. NTP stands for
Network Time Protocol. NTP synchronizes computer clock
times in a network of computers. This will only connect to
a server on the Internet, not a local server.
Select one of the D-Link NTP Servers from the drop-down
menu. The DIR-412 will then synchronize it’s clock to be
the same time as the D-Link Internet time server. Click
the Update Now button to synchronize with the D-Link
Internet time server immediatley.
To manually input the time, use the drop-down menus to
enter the values in these elds for the Year, Month, Day,
Hour, Minute, and Second.
Time Zone:
Enable Daylight
Saving:
Sync your
Computer’s Time
Settings:
Automatic
Time and Date
Conguration:
NTP Server Used:
Set the Time and
Date Manually:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be congured to
automatically adjust the time when needed.
Click the Save Settings button to save any changes made.