DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Figure 106. The page for creating a new LTE connection. The USB modem section.
Parameter Description
USB modem
Mode
The value of the field specifies the type of the network to which the
router connects. Leave the auto value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
8
APN
An access point name.
Figure 107. The page for creating a new LTE connection. The IP section.
Parameter Description
IP
Obtain DNS server
addresses
automatically
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Vendor ID The identifier of your ISP. Optional.
Hostname A name of the router specified by your ISP. Optional.
8 Some LTE USB modems do not support network type selection and work in the auto mode regardless of the value
selected from the drop-down list.
Page 129 of 225
To Next Page
Loading...
