DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
FTP
On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide
access to the USB storage for users of your LAN.
Figure 152. The USB storage / FTP page.
You can enable the FTP server only when a USB storage is connected to the router (in this case, the
Connected value is displayed in the USB storage field). Select the Enable checkbox; if
needed, change the router's port used by the FTP server in the Port field (by default, the standard
port 21 is specified). Then click the Apply button.
To allow access to the content of the USB storage for users of your LAN, proceed to the System /
USB users page and create needed accounts.
To disable the built-in FTP server of the router, deselect the Enable checkbox and click the Apply
button.
Page 194 of 225
To Next Page
Loading...
