DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Configuring Yandex.DNS Service
On the page, you can enable the Yandex.DNS service and configure its operating mode.
Figure 47. Configuring the Yandex.DNS service.
To enable the Yandex.DNS service, select the Enable Yandex.DNS checkbox. Then select the
needed choice of the radio button to configure filtering for all devices of the router's network:
• Safe mode: when this value is selected, the service blocks access to malicious and
fraudulent web sites;
• Child mode: when this value is selected, the service blocks access to malicious and
fraudulent web sites and blocks access to adult content;
• Protection off: when this value is selected, the service provides the DNS server with no
restrictions on access to unsafe web sites.
If you are not going to use the service, leave the Enable Yandex.DNS checkbox unselected.
Click the Next button to continue.
After clicking the Next button, the page for configuring wireless connection opens (see the
Configuring Wireless Connection section, page 67).
Page 66 of 225
To Next Page
Loading...
