DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• save the current settings to the non-volatile memory
• reboot the router
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• restore the factory default settings
• view the system log
• update the firmware of the router
• configure automatic notification on new firmware version
• configure automatic synchronization of the system time or manually configure the date and
time for the router
• check availability of a host on the Internet through the web-based interface of the router
• trace the route to a host
• allow or forbid access to the router via TELNET
• create accounts for users to allow access to the content of the USB storage.
Page 205 of 225
To Next Page
