DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
MAC Filter
On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers
of the router's LAN.
Figure 142. The Firewall / MAC filter page.
Select the needed action from the drop-down list to configure filtering for all devices of the router's
network:
• Allow: Allows access to the router's network and to the Internet for devices (the value is
specified by default);
• Deny: Blocks access to the router's network for devices.
If you need to specify a filtering mode for each device separately, create relevant rules. To do this,
click the Add button.
Page 184 of 225
To Next Page
Loading...
