DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Hide Access Point
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
SSID
A name for the WLAN. By default, the value DIR-620 is specified.
It is recommended to specify another name for the network upon
initial configuration (use digits and Latin characters).
Country
The country you are in. Select a value from the drop-down list.
Channel
The wireless channel number. When the auto value is selected, the
router itself chooses the channel with the least interference.
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Max Associated Clients
The maximum number of devices connected to the wireless network
of the router. When the value 0 is specified, the device does not limit
the number of connected clients.
When you have configured the parameters, click the Apply button.
Page 138 of 225
To Next Page
Loading...
