DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the
WPA Encryption settings section is displayed:
Figure 118. The WPA-PSK/WPA2-PSK mixed value is selected from the Network Authentication drop-
down list.
Parameter Description
Encryption Key PSK
A key for WPA encryption. The key can contain digits and/or Latin
characters.
WPA2 Pre-
authentication
The checkbox activating preliminary authentication (displayed only
for the WPA2-PSK and WPA-PSK/WPA2-PSK mixed
authentication types).
WPA Encryption
An encryption method: TKIP, AES, or TKIP+AES. For the wireless
network operating modes which support 802.11n standard (see the
value of the Wireless mode drop-down list on the Wi-Fi / Basic
settings page), the AES value is only available.
WPA renewal
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 143 of 225
To Next Page
Loading...
