D-Link DIR-632 - Creating PPTP or L2 TP WAN Connection

DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Creating PPTP or L2TP WAN Connection
To create a connection of the PPTP or L2TP type, click the Add button on the Net / WAN page. On
the opened page, select the relevant value from the Connection Type drop-down list and specify
the needed values.
Figure 88. The page for creating a new connection. The General settings section.
Parameter Description
General settings
Provider Leave the Manually value.
Port Leave the auto value.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Page 109 of 197