DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter Description
IMSI
The code stored in the SIM card inserted to your USB modem.
IMEI The code stored in the memory of the USB modem.
Signal level
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
Operator name
When the needed network is available, the name of the operator is
displayed in this field.
Mode
A type of the network to which the USB modem is connected (2G or
3G).
PIN
On the USB modem / PIN page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for CDMA USB modems.
Figure 135. The USB modem / PIN page.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Enter button.
Page 169 of 197
To Next Page
Loading...
