DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Click'n'Connect
To configure a WAN connection, click the Click'n'Connect link in the Net section.
Figure 24. Configuring a WAN connection.
Connect the Ethernet cable provided by your ISP to the WAN port of the router. Verify the relevant
LED (the Internet LED should be on).
Click the Next button to continue.
Page 38 of 197
To Next Page
Loading...
