DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Print Server
On the USB storage / Print-server page, you can configure the router as a print server. Being
configured in this way, the router will allow your LAN users to share the printer connected to the
USB port of the router.
To connect a printer to the router, power off both devices. Connect printer to the USB port of the
router, power on the printer, then power on the router.
Figure 140. The USB storage / Print-server page.
To configure the router as a print server, select the Enable/Disable print-server checkbox and
click the Change button.
If you don't want to use the router as a print server, deselect the Enable/Disable print-server
checkbox and click the Change button.
Page 175 of 197
To Next Page
Loading...
