DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
To enable the PIN code check, deselect the Disable PIN check checkbox, enter the PIN code,
used before disabling the check, in the PIN code field and click the Enter button.
To change the PIN code, enable the PIN code check, enter the current code in the PIN code field,
then enter a new code in New PIN code and New PIN code confirmation fields and click the
Enter button.
If upon one of the operations described above you have entered an incorrect value in the PIN code
field three times (the number of remaining attempts is displayed in the Attempts left field), the
identification card inserted into your USB modem is blocked.
Figure 136. Entering the PUK code.
For further use of the card, enter the PUK code in the relevant field, and then specify a new PIN
code for your SIM card in the New PIN code and New PIN code confirmation fields. Click
the Enter button.
Page 170 of 197
To Next Page
Loading...
