DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter Description
BG Protection
The 802.11b and 802.11g protection function is used to minimize
collisions between devices of your wireless network.
Select a value from the drop-down list.
Auto: The protection function is enabled and disabled automatically
depending on the state of the network (this value is recommended if
your wireless local area network consists of both 802.11b and
802.11g devices).
Always On: The protection function is always enabled (this setting
can substantially lower the efficiency of your wireless network).
Always Off: The protection function is always disabled.
TX Preamble
This parameter defines the length of the CRC block sent by the
router when communicating to wireless devices.
Select a value from the drop-down list.
Long Preamble.
Short Preamble (this value is recommended for networks with
high-volume traffic).
When you have configured the parameters, click the Change button.
Page 143 of 197
To Next Page
Loading...
