DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter Description
RSSI
The signal level at the input of the modem's receiver.
CINR
The relation of the signal level to the noise level. This parameter is
used to measure the quality of the signal.
Base station ID
The identifier of the base station.
Transmit power The signal level at the output of the modem's receiver.
Frequency
The frequency of the signal transmitted by the modem's receiver.
Connect
Click the button to connect to the WiMAX network. Beforehand,
you need to create a WAN connection with relevant parameters.
The button is displayed when the connection is not established.
Disconnect
Click the button to disconnect from the WiMAX network.
The button is displayed when the connection is established or is
being established.
To save the values of the SSID and Diode on modem field, click the Connect button.
Page 172 of 197
To Next Page
Loading...
