D-Link DIR-645 - Page 52

48D-Link DIR-645 User Manual
Section 3 - Software Conguration
The following parameters will be available for conguration:
Enable Automatic
IPv6 address:
The user can tick this option to enable the auto-
conguration feature.
Enable Automatic
DHCP-PD in LAN:
Autoconguration
Tick this option to enable the automatic DHCP-PD
on the LAN.
Autoconguration
Type:
The user can select the auto-conguration type
used here.
Router
Advertisement
Lifetime:
This option is only available when the auto-
conguration type is set to Stateless. Enter the
router advertisement lifetime value used here.