D-Link DIR-810L - Network (MAC) Filters

78D-Link DIR-810L User Manual
Section 3 - Conguration
Network (MAC) Filters
Select Turn MAC Filtering O, Allow MAC addresses
listed below, or Deny MAC addresses listed below
from the drop-down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Click Clear to remove a MAC Address from the
MAC filtering list. Click Save Settings to accept
the changes made, or click Don’t Save Settings to
discard the changes.
Congure MAC
Filtering:
MAC Address:
DHCP Client List:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.