94D-Link DIR-810L User Manual
Section 3 - Conguration
Admin
This page will allow you to change the Administrator password and also enable Remote Management.
Tools
Enter a new password for the Administrator login name. Enter again to
verify the password.
Enter a name for your router.
Enables a challenge-response test to require users to type letters or numbers
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely. This means to
connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Remote management allows the DIR-810L to be configured from the
Internet by a web browser. A username/password is still required to access
the Web Management interface.
The port number used to access the DIR-810L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-810L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the
URL to access the router remotely.
Select Allow All or Deny All from the drop-down menu.
This eld will display the current remote admin lter.
Admin Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
Details:
To Next Page
Loading...
