17
Step 3
IF PPPoE Passed then user will need to enter the Username and
Password as provided by the Internet Service Provider (ISP). IF DHCP
passed device will automatically skip to step 5.
Username: Enter your Username here. (usually looks like an email
address like Yourname@telkomsa.net)
Password: Enter your Password here.
Confirm Password: Enter the same password again here.
Note: Using admin for the username & password will not work on this step as this is the account details for your Fibre line, which is unique to
each client’s account.
Step 4.
If connection is on PPPoE device will now test if the configured
account is valid. If the test fails, please click on the back button and
double check that the details on step 3 are correct. If the details
have been entered correctly and step 4 still fails, please contact
your Internet Service Provider and request for them to send you
new PPPoE details.
if successful click Next to continue to Step 5.
To Next Page
Loading...
