D-Link DIR-879 - Page 106

102D-Link DIR-879 User Manual
Section 4 - Conguration - Extender Mode
Smart Connect
Smart Connect: Enable or disable the Smart Connect Feature. When enabled only
a few conguration options are available to simplify conguration.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Security Mode: Choose None or WPA/WPA2-(Personal) (recommended).
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
If Existing Network Type is Wi-Fi and Smart Connect is Disabled the following options are
available:
2.4GHz / 5GHz Extended Wi-Fi
Status: Enable or disable the 2.4 GHz / 5 GHz wireless network.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Security Mode: Choose None or WPA/WPA2-(Personal) (recommended).
Password: Create a password to use for wireless security.
Extender (continued)