D-Link DIR-879 - Wizard

31D-Link DIR-879 User Manual
Section 4 - Installation - Wireless Extender
Connect to an Uplink Network using the Setup Wizard
4. Press the power button, and wait approximately one minute.
5. If you are conguring the DIR-879 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi
Conguration Card. You can also nd the Wi-Fi network names and passwords printed on the label attached to the
bottom your router.
Existing RouterInternet Broadband Connection Device
(e.g. DSL/Cable Modem)
Wi-Fi Conguration Note
DIR-879
Existing RouterInternet Broadband Connection Device
(e.g. DSL/Cable Modem)
DIR-879
If you are conguring the DIR-879 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable
into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
DIR-879