7D-Link DIR-879 User Manual
Section 1 - Product Overview
Hardware Overview
Back Panel
1 Reset Button To reset the device to its factory default settings, use a paper clip press and hold the reset button for 3 seconds.
2 WPS Press to start the WPS process and automatically create a secure connection to a WPS client.
3 LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.
4 Internet Port Using an Ethernet cable, connect your broadband modem to this port.
5 Power Connector Connector for the supplied power adapter.
6 Power Button Press the power button to power the DIR-879 on and o.
7 Mode Switch
Select between Router and Extender modes. To change modes, move the switch to the desired position and after
5 seconds the router will reboot into the desired mode. Router is the default mode.
3 4 5 6 721
To Next Page
Loading...
