D-Link DNS-323 - Network Storage Enclosure NAS Server User Manual

12D-Link DNS-323 User Manual
Section 2 - Installation
5. Connect an Ethernet cable to the available
Ethernet port. This cable should connect
the DNS-323 to your local network via a
router or switch, or directly to a computer for
configuration.
6. Connect the power adapter to the power
receptacle.
7. Connect a USB printer. (Optional)

D-Link DNS-323 - Network Storage Enclosure NAS Server Specifications

General

Device Type	NAS server
Number of Bays	2
Weight	1.5 kg
Network Architecture	Gigabit Ethernet
Supported Drive Types	3.5" SATA I/II
RAID Levels	JBOD, RAID 0, RAID 1
Supported Protocols	HTTP, FTP, SMB, NFS
Max Internal Capacity	4 TB (2 x 2 TB)
Processor	Marvell 88F5182
Memory	64 MB
Power Consumption	25 W (operational)
Operating Temperature	0 to 40°C (32 to 104°F)
Interfaces	1 x 10/100/1000 Gigabit Ethernet, 1 x USB 2.0
Data Transfer Rate	1 Gbps