426
D-Link ShareCenter DNS-327L User Manual
Section 4 - Conguration
1. Connect a USB storage device to the USB port on the
back panel of the device. The LED will blink then become
solid once it is ready for backup, if USB Backups has been
enabled in the USB backup settings.
2. Press the USB button to start the backup process. The
LED starts to blink that the backup is in the process. The
ShareCenter™ will copy or sync all the les from the
source folder to the destination folder. Please Note: No
warning message will appear to indicate that all data
on the destination folder will be deleted automatically.
USB Backup Process
To Next Page
Loading...
